Dirty Dingo Motorsports LS1 Water Pump Spacers for Truck Engines DD-LS-WP-SP1

Dirty Dingo Motorsports LS1 Water Pump Spacers for Truck Engines DD-LS-WP-SP1 Complete water pump spacer kit for installing a 1998-2002 Camaro/Firebird water pump onto LS Truck accessory spacing. When installing a shorter LS1, LS2, or aftermarket LS intake manifold on your engine the truck upper water pump outlet will interfere with the throttle body. The Camaro water pump upper outlet is straight out the front. CNC mill machined from 6061-T6 billet aluminum. One of the spacers is drilled and tapped for 1/8 inch pipe tap fitting. This can be used for routing the steam line from the head directly to this spacer. Includes 2 billet spacers, 6 grade 8 zinc coated Allen bolts, 6 stainless steel washers, 4 felpro gaskets, one 1/4 inch brass pipe fitting, and one 1/8 inch pipe plug to plug this port if you do not need to route the steam line to the spacer. These billet spacers will also seal correctly with the factory water pump gaskets. * Must use Camaro/Firebird LS1 belt tensioner. * Will not work on a Variable Valve Timing engine.

• CNC Billet Aluminum
• Water Pump Spacers
• Grade 8 zinc coated Allen bolts