Marble Restore Maxi kit to Renew The polishing of Natural Stone Ruined by Etch Marks Scratches or limescale, to Polish Dull Marble - Increased by 100 gr of Powder polishing More

This kit consists of diamond abrasives for hand polishing marble and a sachet of polishing powder to obtain mirror polishing. The product is formulated to restore the shine of marble compromised by acid substances, scratches or other dullness. It is suitable for small interventions (max 1 m2). Even a single stain can be eliminated without necessarily having to act on the entire surface. It works perfectly only on very carbonate stones (with calcium carbonate mineral content greater than 80%). Granites, quartzites, all siliceous stones (or stones with low carbonate content) and some green marbles cannot be polished to a mirror finish with this kit. For this type of stones, a specific kit for granite is recommended (e.g. Virginia TU kit). Warnings: Stains absorbed deep into the stone, such as oil stains or colored stains, cannot be removed with this kit. Recommendations: in the event of an unsatisfactory result, it is advisable to repeat all the work again following the prescribed phases more scrupulously. Yields: the duration of diamond abrasives can be estimated at a few square metres, but much depends on how they are used. The polishing powder has a yield of 1 m2 for each 60 gram sachet. Compared to the "Marble Restore Kit", this MAXI variant contains an additional 100 g bag of polishing powder.